Model 2360

General Purpose Data Logger

Part Number: 48-2872

Features

• Scaler / Ratemeter / Data Logger
• Simultaneous Alpha & Beta Measurements with Audio Discrimination
• Logs 550 Data Points
• Analog & Digital Display
• Six Separate Alarms
• Overload Protection
• RS-232 Port

If you need to separately count alpha and beta concurrently and log the results, the Model 2360 will be the right tool. This instrument is an optimized Alpha-Beta Ratemeter, Scaler, and Data Logger that offers a traditional analog readout supplemented with a digital LCD for the scaler function. This meter supports many different externally connected detectors; two of the more popular ones are noted below.

Up to 550 data points can be stored. Each data point consists of a sample number, date/time stamp, both alpha and beta sample measurements, and a 10 character location identifier. The location identifier can be input via an optional external device through the RS-232 serial port.

A front panel mounted three-way switch facilitates selecting alpha only, beta only, or alpha plus beta. Other controls include a rotary switch for selecting any of the four-decade ranges, battery test, and instrument shut-off; a switch for viewing the high voltage or resetting the counts; an audio volume adjustment knob; a scaler count time selector rotary switch; and a handle mounted push-button for logging and starting scaler count cycles.

• Specifications
• Meter Faces
• Options
• Documents
• Software

• Specifications
• Meter Faces
• Options
• Documents
• Software

Specifications

Indicated Use	Alpha-Beta discrimination, Data logging
Compatible Detectors	Dual phosphor scintillation, Gas proportional
Linearity	Reading within 10% of true value
Meter Dial	0 - 500 cpm, 0 - 2 kV, BAT OK, OL (overload); (others available)
Scaler	6-digit LCD display with 0.64 cm (0.25 in.) digits, overflow arrow, colons to indicate when a count is in process, and backlight
Data Logger	Capable of storing up to 550 individual data points with the following identifiers for each point (all data is stored in non-volatile memory allowing batteries to be removed without loss of data): Alpha and beta sample counts Sample number Date/Time stamp Scaler count time 10 character location identifier (can be set by ASCII terminal or PC)
Header Information	6 lines of user defined memory at the beginning of the stack for storing user name, survey name, serial numbers, etc. (information is dumped with logged data)
Overload	Senses detector saturation, indicated by red lamp on meter and meter deflecting to full scale (internally adjustable)
Count Time Range	0.1 to 60 min. with capability to preset user-programmed value
Alarm	Has alarm capabilities on both the scaler and ratemeter. Both circuits allow for independent alarm settings of the alpha channel, beta channel, and the alpha/beta channel. The scaler alarm setpoints can be set at any point from 0 to 999999 counts, and the ratemeter alarms can be set at any point from 0 to 999999 cpm. Alarm points can be set via the keypad or PC
Controls	Reset / Read HV: A two-position, momentary action switch to allow for the meter to be reset or a reading of the HV setting Count Type: Toggle switch to select alpha+beta, alpha only, or beta only Audio Volume: Rotary knob volume control, greater than 60 dB at 61 cm (2 ft), full volume, selectable dual or individual click-per-event for alpha and beta counts and divisions of 1, 10, 100, or 1000 events per click (beta counts only) Instrument: 6-position rotary knob for instrument off, battery check, and range multipliers: x1, x10, x100, x1000 Count Time: Switch selectable times of 0.1, 0.5, 1, 2, 5, 10, or 60 min. Also allows for a specific count time to be set from a PC. Logging Pushbutton: Located in handle, activates scaler and/or log a count
Logging Function Control	Internal selection that enables the pushbutton to log a ratemeter reading, initiate a scaler count and log the resulting reading, log both the scaler and ratemeter reading, or disable the logging function
Response Time	7 seconds on x1 range, 2 seconds on all others
High Voltage	Adjustable from 200 to 2000 Vdc (can be read on meter)
Threshold	Alpha: -40 to -700 mVdc Beta: -2 to -15 mVdc
Calibration Due Date	An internal date that disables the instrument if the required calibration interval has been missed
Temperature Range	-20 to 50 °C (-4 to 122 °F) May be certified for operation from  -40 to 65 °C (-40 to 150 °F)
Battery Life	Typically 250 hours with alkaline batteries (battery condition can be checked on meter)
Data Output	9-pin RS-232 port for connection to PC for data download and adjustment of setup parameters. A one meter RS-232 to USB adapter cable is included. PC interface software is available for download here.
Size (H x W x L)	16.5 x 8.9 x 21.6 cm (6.5 x 3.5 x 8.5 in.)
Weight	1.6 kg (3.5 lb), including batteries

---

Meter Faces

Meter Face	Image (click to view larger)	Description	Detectors
202-840		0 - 500 cpm 0 - 2 kV BAT TEST	Any
202-855		0 - 500 cpm 0 - 2 kV BAT TEST ALARM OVERLOAD Digital Readout	Any
202-901		0 - 50 cpm 0 - 2.0 kV BAT TEST ALARM OVERLOAD	Any
202-972		0 - 500 cpm 0 - 2 kV BAT TEST ALARM OVERLOAD Digital Readout	Any
202-1077		0 - 10 cps 0 - 2 kV BAT TEST ALARM OVERLOAD Digital Readout	Any

---

Options

Option	Description	Part Number
Command Terminal for Model 2360	Hand-held command terminal.	4390-177
Barcode Scanner for Model 2360	CBL-M hand-held barcode scanner.	8390-344
Detector Clips	Stainless steel clip attaches to instrument handle or case facilitating one-handed carrying of instrument and detector.	Depends on detector.
Lighted Handle	Handle with LED to illuminate the instrument display.	4464-154
Shoulder Strap	Adjustable nylon shoulder strap.	4363-413
Headphone Jack	Adds headphone jack to instrument.	4464-464
Stereo/Mono Headphones	Adjustable stereo/mono headphones.	22-9313
Transport & Storage Case - Medium	Rugged, dust- and waterproof transport and storage case.	2311063
Plastic Disk Check Sources	General purpose check sources used to check instrument response.	Depends on source material and activity.

---

Documents

• Data Sheet
• Product Manual
• CE Certificate

---

Software

PC interface software and the driver needed to use the RS-232 to USB adapter cable are available for download on the Software & Firmware Downloads page.

 

---